8011 Aluminum Foil

Aluminum foil is a hot stamping material that is directly rolled from metal aluminum into thin sheets. It is soft in texture, good in ductility, and has a silvery white luster. It is easy to process various patterns.

Aluminum foil is a soft metal film with the advantages of moisture-proof, air-tight, shading, abrasion-resistant, non-toxic and tasteless. It is used as its packaging material; electrolytic capacitor material; thermal insulation material for buildings, vehicles, ships, houses, etc.; it can also be used as decoration, as well as various stationery prints and light industrial products.

Features of aluminum foil

(1) Good processability: aluminum foil has strong decorative properties, moderate hardness, can be easily bent and formed, and can be continuously punched at high speed, which is convenient for direct processing into products without complex surface treatment, which greatly shortens the production cycle of products and reduces the production of products. Cost of production.

(2) Good weather resistance: aluminum foil with standard thickness oxide film (3μm) will not change color, corrosion, oxidation and rust after long-term indoor use. Aluminum foil with thick oxide film (10μm) can be used outdoors, and it can be exposed to sunlight for a long time without discoloration.

(3) Strong sense of metal: The surface hardness of the anodized aluminum foil is high, reaching the gem level, with good scratch resistance, no paint on the surface, retaining the metal color of the aluminum foil, highlighting the modern metallic sense, and improving the product grade and added value.

(4) High fire resistance: pure metal products, no paint and any chemical substances on the surface, no combustion at 600 degrees, no toxic gas, in line with fire protection and environmental protection requirements.

(5) Strong anti-fouling property: no fingerprints, there will be stain marks, easy to clean, no corrosion spots.

(6) Strong applicability: Wide range of uses, suitable for metal aluminum ceilings, curtain wall aluminum foils, aluminum-plastic panels, fireproof panels, honeycomb aluminum foils, aluminum veneers, electrical panels, cabinet panels, furniture panels, etc.

Thickness

Aluminum foil can be divided into thick foil, single zero foil and double zero foil according to the thickness difference.

① Thick foil (“heavy gaugefoil”): foil with a thickness of 0.1 to 0.2 mm.

②Single zero foil (“medium gauge foil”): foil with a thickness of 0.01mm and less than 0.1mm/.

③Double zero foil (“light gauge foil”): The so-called double zero foil is a foil with two zeros after the decimal point when its thickness is measured in mm, usually an aluminum foil with a thickness of less than 0.01, that is, an aluminum foil of 0.005~0.009mm . In foreign countries, aluminum foil with a thickness of ≤40ltm is sometimes referred to as “light gauge foil”, and aluminum foil with a thickness of >40btm is collectively referred to as “heavy gauge foil”.

Specification